Getting reauthentication while move from one floor to another floor

abhijeetsharma
Comes here often

Getting reauthentication while move from one floor to another floor

HI,

 

Clients getting reconnect or reauthentication request while moving from one floor to another within same network.

 

 

Floor 1 AP Firmware version: 30.6

Floor 2 AP Firmware version: 30.7

AP model: MR 44

 

4 Replies 4
GreenMan
Meraki Employee
Meraki Employee

You'll need to provide some more information around the configuration here.   Do the clients change VLAN (& therefore IP address) when they roam?   If they do, you'll need to enable a means for Layer-3 roaming.   This choice tends to be a function of scale:  how big the environment is - how many clients do you get associating with this SSID at the same time?

 

If you can, I would look to stick to Layer-2 roaming only;   with this the client is always assigned to the same VLAN, whichever AP they associate with or roam to.   You would also maybe want to look at L2 roaming mechanisms, though there are some dependencies, depending on how clients are being authenticated:   https://documentation.meraki.com/MR/Wi-Fi_Basics_and_Best_Practices/802.11k_and_802.11r_Overview

KarstenI
Kind of a big deal
Kind of a big deal

When you say the floors have different firmware versions, I assume you have one dashboard network per floor?

A Meraki Dashboard Network defines the fast-roaming domain. If a station roams from an AP in network 1 to an AP in network 2, a slow roam is expected.

If you found this post helpful, please give it Kudos. If my answer solves your problem, please click Accept as Solution so others can benefit from it.
GIdenJoe
Kind of a big deal
Kind of a big deal

This!

GreenMan
Meraki Employee
Meraki Employee

@KarstenI makes a great point, which I should have spotted myself.   If you have one site, all the APs should go in the same Network.

Get notified when there are additional replies to this discussion.