Firmware Upgrade MR29.5.1 to MR30.5

Jonners
Conversationalist

Firmware Upgrade MR29.5.1 to MR30.5

Has anyone seen any issues when upgrading from MR29.5.1 to MR30.5. OR has anyone noted a significant improvement by upgrading to MR30.5

5 Replies 5
PhilipDAth
Kind of a big deal
Kind of a big deal

I have been running 30.5 for a while and it works good for me.  I wasn't having any issue before, and I am still not having any issues.

cmr
Kind of a big deal
Kind of a big deal

We had a lot of LAN stability issues with CW9166s and 29.7(1), since upgrading to 30.5.1 they seem much better.  Otherwise it all just works 😎

C-D
Here to help

Our Macs have roaming issue with 30.5 on 5Ghz only SSID with 802.11r - Adaptive, 801.11w disabled, Load balancing is disabled. 

So I had to revert to 29.7.1

 

 

Paccers
Building a reputation

Tried 30.5.1?

lloydz
Here to help

No noticeable improvements that I've seen.  Just make sure your WAN bandwidth can handle it as 30.5 makes the APs very chatty with Meraki infrastructure.

 

https://community.meraki.com/t5/Wireless-LAN/MR36-Lots-of-Traffic-to-from-Meraki-Infrastructure/m-p/...

Get notified when there are additional replies to this discussion.
Welcome to the Meraki Community!
To start contributing, simply sign in with your Cisco account. If you don't yet have a Cisco account, you can sign up.
Labels