Dot1X Authentication failes with Cisco AP

[Philipp1]

Hi,

I´m facing some issues with our Cisco AP (C9120AXI-E). When I connect them to our MX68CW Router with configured dot1x it works just fine. But as soon as I disconnect and reconnect the AP the authentication fails.

First connect:

Reconnect of AP:

ISE Log:

So I guess that the RADIUS server (ISE) is configured correctly because of the authentication success of the first plug-in.

[RomanMD]

Is that the authentication for client? 

Does your AP have a static IP, or is it DHCP?

Is the AP connected to a controller or is EBW?

Is the policy checking for NAS ID?

I am just thinking that after reconnect the AP is getting a new IP and the Radius packet a sourced from different IP if the policy is not checking for the NAS ID... but I am not radius expert at all... 

and last but not least - go away from EAP-FAST on ISE<2.6 and iPhones 🙂 I had too much trouble with TLS version miss-match.