Disabled gateway (Bad IP assignment)

CGUERRERO
New here

Disabled gateway (Bad IP assignment)

My Ap's are suddenly getting Disabled gateway (Bad IP assignment) throughout the day. These were installed over a year ago and never had a problem with their configuration before. they are Mr56. Firmware: MR 30.6

1 Reply 1
Mloraditch
Head in the Cloud

That usually means the static ips or vlan for dhcp you've assigned them are not working properly.

 

Something has changed somewhere, without knowing more about your setup it's hard to say precisely. I'd check your DHCP server and make sure it's up for the relevant vlan or make sure some uplink somewhere hasn't been changed and a vlan not passing through. You can test using a laptop and see if it can get online using the settings you'd be using for the APs as well

If you found this post helpful, please give it Kudos. If my answer solves your problem please click Accept as Solution so others can benefit from it.
Get notified when there are additional replies to this discussion.
Welcome to the Meraki Community!
To start contributing, simply sign in with your Cisco account. If you don't yet have a Cisco account, you can sign up.
Labels