Custom Splash / Duration

nick-scs
New here

Custom Splash / Duration

Hello,

I have a custom splash page for a clickthrough page and I am trying to give users different durations.

I am redirecting as per the guide with https://<meraki>?continue_url=<continue_url>&duration=86400

This seems to work but any other duration seems to be 24 hours. I'm trying to have duration=2592000 for 30 days but these users get 24 hours.

The guide also says that the duration will be limited to splash frequency in the settings but even with that on 30 days i get 24 hours?

Thanks

 

1 Reply 1
alemabrahao
Kind of a big deal

You cannot have multiple durations for the same splash page.

You would have to have different SSIDs with a different splash page for each of those SSIDs.

 

https://documentation.meraki.com/General_Administration/Cross-Platform_Content/Splash_Page_Frequency

I am not a Cisco Meraki employee. My suggestions are based on documentation of Meraki best practices and day-to-day experience.

Please, if this post was useful, leave your kudos and mark it as solved.
Get notified when there are additional replies to this discussion.