Containing Other APs for Reduce Interference on 2.4Ghz

meraki-newbie
Getting noticed

Containing Other APs for Reduce Interference on 2.4Ghz

Hello All,

 

We are facing more than 700 Interfering APs on our AP, could it be the problem all users that used 2.4Ghz having bad quality experience like high latency and intermittent?

 

merakinewbie_0-1729139108217.png

 

Should we contained all the Other APs to reduce interference and improve user experience?

 

thank you

1 Reply 1
Purroy
Meraki Employee
Meraki Employee

No, that will actually have several negative effects.   First, be careful when using rogue AP containment as this is not allowed in some countries.  Second, it will have the opposite effect as the containment uses the flooding of deauth wireless beacons to the clients so it will severely increase the channel usage. Third, you might upset some of your neighbours.

 

Honestly 2.4GHz is almost impossible to be used now a days and expect any type of quality, the most common recommendation is to actually disable it in your APs after verifying that all of your clients can run on 5GHz.  I most environments this is possible.  If not then disable 2.4GHz in about 2/3s of your APs.

Get notified when there are additional replies to this discussion.
Welcome to the Meraki Community!
To start contributing, simply sign in with your Cisco account. If you don't yet have a Cisco account, you can sign up.
Labels