Cold swap MX used as wireless concentrator

[Toby]

I'm guessing this is a somewhat silly question, but I like to lean towards knowing over guessing.

I'm about to swap a MX60 used as a wireless concentrator for sites around the globe. I'm assuming there are no special considerations I need to regard when performing a cold swap for a concentrator over a "regularly" configured MX?

[CptnCrnch]

There's a great doc for that 🙂

https://documentation.meraki.com/MX/Other_Topics/MX_Cold_Swap_Replacing_an_Existing_MX_with_a_Differ...

[Toby]

Thanks for the link 🙂

I've already read it (should have been clear on that), I've swapped MX devices in the past using the method outlined on that page and are familiar with the general procedure. What I was wondering was if there were any specific considerations which needs to be taken into account when swapping a MX which is configured as a wireless concentrator.