Meraki

Mark_Brewster

Client Isolation in MR56 AP's

alemabrahao

What is your question ❓

https://documentation.meraki.com/MR/Firewall_and_Traffic_Shaping/Wireless_Client_Isolation

I am not a Cisco Meraki employee. My suggestions are based on documentation of Meraki best practices and day-to-day experience.

Please, if this post was useful, leave your kudos and mark it as solved.

Mark_Brewster

How do I implement it? Had a PEN Test - suggested I enable Client Isolation on the Guest WiFi. Will read over your reference.

Thanks.

alemabrahao

Take a look at this document.

https://documentation.meraki.com/MR/Firewall_and_Traffic_Shaping/Wireless_Client_Isolation

It's under Wireless > Configure > Firewall & traffic shaping

I am not a Cisco Meraki employee. My suggestions are based on documentation of Meraki best practices and day-to-day experience.

Please, if this post was useful, leave your kudos and mark it as solved.

BlakeRichardson

Client isolation is a supported feature. Are you asking if it's possible or do you need help implementing it?

If you found this post helpful, please give it Kudos. If my answer solves your problem, please click Accept as Solution so others can benefit from it.

Mark_Brewster

Implementing. Couldn't find it in the SSID's.

Had a PEN Test and it was suggested that Client Isolation be enabled on the Guest SSID.