Clarification on Walled Garden Behavior with Splash Access

MauroF
Building a reputation

Clarification on Walled Garden Behavior with Splash Access

Hi,

I've just created an Guest SSID and integrated it with Splash Access.

While testing the authentication using my @protonmail.com email address, I was able to log in successfully.

 

However, I'm wondering: how is it possible that I can reach the ProtonMail service, even though this domain is not  listed in the Walled Garden settings suggested by Splash Access?

This raises a question: what is the actual role and behavior of the Walled Garden in this setup?

Thanks

M

8 Replies 8
MauroF
Building a reputation

I did set the Captive Portal Strength. Set this to Block all access until sign-on is
complete

ww
Kind of a big deal
Kind of a big deal

Did you access you email web service? Or just insert it as username?

 

If you can access websites prior to authentication. Then you probably havent set the Captive Portal Strength to Block all access until sign-on is
complete

 

MauroF
Building a reputation

when i connect to the wifi:

-splash page of spash access pops in

-i type, name,surname and email address

-then i check the email to click the link to get connected.

 

The question is: how can i reach protonmail.com if that site is not in the Walled garden?

MauroF
Building a reputation

Capturew.PNG

 

JonoM
Meraki Employee
Meraki Employee

Hi @MauroF,

 

I would recommend we look at a packet capture taken from the client when you are logging in to see what kind of traffic it is sending. I am not sure if protonmail.com is in any way related to Proton VPN, but if it is then I have seen some interesting behaviour in the past.

 

In these situations, the application has crafted its packets to look like DNS on port 53. The walled garden setting block all access except for DHCP and DNS (as these are needed to be able to see the login page). I should note that I would only expect this if some kind of VPN was in use, and even then many VPN solutions don't behave this way. In any case, taking a packet capture would be a good first step to see what kind of traffic the AP is allowing through the walled garden 😊

If you found this post helpful, please give it kudos. If my answer solved your problem, click "accept as solution" so that others can benefit from it.
MauroF
Building a reputation

Thanks for your reply.
The real issue is: how can I allow a guest to authenticate via email if their mail provider is not included in the Walled Garden?

Is there a solution to grant the guest temporary full internet access , for example, for 5 minutes , so they can check their email, regardless of the provider (not just Gmail, Hotmail, etc.)?

 

Cause now im using protonmail as a reference but could be also  John@whatever-mail.com

alemabrahao
Kind of a big deal
Kind of a big deal

I don't know splash access in depth but I believe that through splash access it must do some kind of bypass, thus allowing the domain.

I am not a Cisco Meraki employee. My suggestions are based on documentation of Meraki best practices and day-to-day experience.

Please, if this post was useful, leave your kudos and mark it as solved.
SplashAccess
Here to help

Hi , Yes you can set the option in teh Dashboard for users to have 5 Mins of guest Access then they are able to click the link in the Email , let me know if you need some support to set up . Cheers Tim

Tim Ormrod
Get notified when there are additional replies to this discussion.
Welcome to the Meraki Community!
To start contributing, simply sign in with your Cisco ID. If you don't yet have a Cisco ID, you can sign up.