Cast stopping to work after upgrade

Bandi
Conversationalist

Cast stopping to work after upgrade

Hi,

 

I used Spotify cast in my local LAN for a long time. Since yesterday (after an upgrade) I'm not able to cast. I see the (in Spotify devices menu) the devices (on my laptop, on my mobile too) it looks getting connected but after 3-4 sec it drops the connection. I tried 3 different (chrome)cast enabled devices.

The Wireless in bridge mode as was before.

Thanks,

bandi 

5 Replies 5
DarrenOC
Kind of a big deal
Kind of a big deal

Hi @Bandi , not seen this myself but why not roll the firmware back?  Then raise a ticket with support to inform them of what broke.

Darren OConnor | doconnor@resalire.co.uk
https://www.linkedin.com/in/darrenoconnor/

I'm not an employee of Cisco/Meraki. My posts are based on Meraki best practice and what has worked for me in the field.
Bandi
Conversationalist

Good point @DarrenOC , but I did the upgrade because the site-to-site VPN (the SSID tunneled into it) stopped working, and needed to upgrade everything to works again. So if I roll back I lose the tunneled SSID... or I had to find which automatic upgrade (?) occurred the VPN problem and rollback that too.

But thanks I'm thinking about it (now I stream on Airplay..)

cmr
Kind of a big deal
Kind of a big deal

@Bandi what version were you on and what are you on now, also what device is it?

If my answer solves your problem please click Accept as Solution so others can benefit from it.
Bandi
Conversationalist

@cmrMR 26.8.1 → MR 27.5 I have MR33, MR30H APs

Bandi
Conversationalist

After 2 days it has started to work... perhaps it was an IP addressing refreshing issue? Never will be known I think.. But thanks for the help,:)

Get notified when there are additional replies to this discussion.
Welcome to the Meraki Community!
To start contributing, simply sign in with your Cisco account. If you don't yet have a Cisco account, you can sign up.
Labels