Bandwidth quota limit for wireless client

[Indian1]

Hi all,

Is there any technic to set quota limit for wireless client in meraki dashboard. I want to set quota limit for those clients who have exceeded bandwidth  .

For example - Quota for one day let assume - 50MB, If client excided for than set bandwidth quota limit 50mb then can't access anything and there should display on prompt message that you have used bandwidth set quota 50mp.

your response would be more appreciable.

Thank you

[DarrenOC]

You can’t set quotas but you can set bandwidth limits 

https://documentation.meraki.com/MR/Firewall_and_Traffic_Shaping/Traffic_and_Bandwidth_Shaping#:~:te....

[DarrenOC]

https://documentation.meraki.com/MR/Firewall_and_Traffic_Shaping/Configuring_Bandwidth_Limitations_a...

[PhilipDAth]

Third-party integrations like Splash Access allow you to do this.

https://www.splashaccess.com/throttle-bandwidth-hogs-with-realtime-monitoring-policies/

[TonyCummins]

Hi, Do you know of any integrations that would allow insight into end users internet usage per device.

For example, My AV triggers an alert on endpoint ABC, I jump on and verify its nothing too serious and a site that is in their block list as hosting malware. I then jump into meraki, pull up endpoint ABC and see where he was before and after the alert was triggered.