Auto Locate Meraki APs on Floor Plan

Solved
FlyingFrames
Building a reputation

Auto Locate Meraki APs on Floor Plan

Since CW APs already have a GPS chip to enable auto AP placement, does it work for CW APs working in Meraki mode?

 

Does it have any dependence on Cisco Spaces?

1 Accepted Solution
KarstenI
Kind of a big deal
Kind of a big deal

I haven't seen any announcement for that. Neither for an Auto-Locate feature nor for the external GNSS module. Only the CW9163E has this module built in. 

View solution in original post

5 Replies 5
KarstenI
Kind of a big deal
Kind of a big deal

I haven't seen any announcement for that. Neither for an Auto-Locate feature nor for the external GNSS module. Only the CW9163E has this module built in. 

KarstenI
Kind of a big deal
Kind of a big deal

Just announced on MFD11: AutoLocate is landing soon:

KarstenI_0-1715890632772.png

 

Brash
Kind of a big deal
Kind of a big deal

It's been released as an early access feature for firmware 31.1 and above. (Organisation -> Early Access)

There's no documentation available for it yet but I imagine it won't be long before that it also provided.

Chrisgw
Meraki Employee
Meraki Employee

Hello Meraki Community,

Are you tired of the time-consuming process of network planning and deployment? Are you struggling to maintain accurate and up-to-date information about APs locations? Solve these issues of Day 0 to Day N deployments with AP Auto Locate.

We are seeking participants capable of implementing this feature for large-scale networks that have 8+ compatible APs on a floor plan to work with and provide valuable feedback to the Cisco Wireless product team. This adoption insight will help us refine AP Auto Locate and make it even better!

If interested, please sign up using the link below to onboard yourself to the Stomio project for feature testing. Based on your network characteristics, we will contact you to gather information on your experience.

 

https://app.stomio.io/opt-in/SU6gQ_4TyCEA6M9ScvFCl57qtPhpW-MpjK3GFnXUqltY9UnuqN8cCSlwhWD36R0sOwwx60R...

 

Key Benefits of AP Auto Locate:

  • Save Time & Reduce Complexity: Automatically determine and place AP locations on floor plans with ease.
  • Enhance Network Performance: Ensure accurate, up-to-date AP locations for optimal client device location accuracy.
  • Adaptable Solutions: Use GNSS when available, or place a few manual anchors per floor if GNSS is inaccessible.
  • Compatible with Leading Hardware: Supported on a range of models, including MR78, MR36H, MR36, MR46, MR56, MR57 (GPS capable), CW9162 (GPS capable), CW9164 (GPS capable), and CW9166 (GPS capable).

Firmware Compatibility:

  • MR31+

We appreciate your support and look forward to your participation!

DaveBenham
Meraki Employee
Meraki Employee

Indoor CW916x APs do not have integrated GPS.  However, a GPS is not required for AP Auto Locate!  AP Auto Locate works by using RF to accurately measure distances between your APs, and then using that information to determine each AP's relative position to one another.  We then ask you to manually place a few "anchor" APs and the rest will automatically position themselves on maps.  

 

It works on the following AP models in Meraki mode, and there is no dependency on Cisco Spaces:
CW9166, CW9164, CW9162, MR57, MR56, MR36, MR36H, MR78.

 

If you have tried it, I'd like to hear about your experience with the feature!

Get notified when there are additional replies to this discussion.
Welcome to the Meraki Community!
To start contributing, simply sign in with your Cisco account. If you don't yet have a Cisco account, you can sign up.
Labels