Solved! Go to solution.
It’s designed to provide an alternate path for management traffic, separate from the data traffic.
https://documentation.meraki.com/Firmware_Features/Wireless_%28MR%29_Firmware_Features_Directory
Hello,
To my knowledge this feature is working as expected. I have several customers using it. If it does not work on your environment I kindly suggest you open a support case to check what might be happening.
It is primarily about the RADIUS feature via the AltMgmt interface. Support has confirmed that there is a problem here and there is currently no fix.
The problem is that the requests to the RADIUS are sent via the "normal" and not the "alternative" interface.
After massive testing and tickets it seems this feature to be broken. Followed the advice to use DHCP at the AMI instead of static. Did factory resets but at the end, a wireshark of the attached switch port still shows the RADIUS packets to flow with the Mgmt-IP instead of the AMI-IP.
I'm really at the end of my tether, I can't update the customer's APs and am stuck in version 28.x. Great.
Is your RADIUS server in the same subnet as the APs normal interface? In that case I can see why it might be used instead of the management interface. If it is, can you try changing the normal interface to a new subnetnamd see if that still fails?
No, the RADIUS is located in a different network, it's also a different network class.
MR29.7.1 is the latest version in which it works as expected, either with DHCP or static IPs on the Mgmt and AMI interface.
After more testing it seems the AP uses somtimes both interfaces.....red marked is the MGMT and green marked is the AMI interface. What the hell I'am doing wrong? 😞
Hello,
Firmware version MR30.7 has been released with a fix for this issue.
Hello,
Support answered with 31.1.1 it should be fixed, but this is untested from my point.
I test this next week and report back.
Yes,
Both 31.1.1 and 30.7 do have the fix.
Pablo
Just tested 31.1.1 and it runs as if nothing had happened 😎.
30.7 I'am going to test out now.
I can confirm that 30.7 also fixed the issue. 🚀🎉