Adding Meraki to ISE

satyamothukuri
Conversationalist

Adding Meraki to ISE

Hello All,

We are planning to integrate Meraki wireless network to ISE for authentication. I would like to know 

 

1. Auth request will be from AP's?

2. Do we need add all AP's to ISE for receving auth. we have WLC's added in ISE, so want to know how we can add all AP's?

3. can we add Accounting Servers  also meraki? As in WLC we will add Authentication Servers and Accounting Servers.

 

Is there any document i can refer for the integration meraki wireless with ISE.

 

Thanks in advance.

 

  

 

2 Replies 2
m841
Here to help

All of the reference material for ISE integration is on this single page that should answer all of your questions and run through the basic configuration on each side.

 

https://documentation.meraki.com/MR/Encryption_and_Authentication/Configuring_RADIUS_Authentication_...

 

 

PhilipDAth
Kind of a big deal
Kind of a big deal

>1. Auth request will be from AP's?

 

Yes.

 

>2. Do we need add all AP's to ISE for receving auth. we have WLC's added in ISE, so want to know how we can add all AP's?

 

Yes.  Typically you just add the subnet.  This then covers all for the APs in one go.

 

>3. can we add Accounting Servers  also meraki? As in WLC we will add Authentication Servers and Accounting Servers.

 

Never tried.  Doesn't seem much point when you have the Meraki dashboard.

Get notified when there are additional replies to this discussion.