Add MR36 to Z3 for targeted wifi in a remote part of the building?

[Mike_P1]

Greetings, Meraki community!

So...

Initial design requirement: Z3, with wifi disabled, providing IPSec tunnel and ISE authentication for single-user access at remote sites. We've had this in place for quite some time now.

Fast forward to today: I'd like to see if the same Z3 (with wifi still disabled) would function correctly with an MR36 via PoE to another part of the building where wifi is required. 

 - The Z3 would still provide the IPSec tunnel and ISE authentication for its user

 - On the MR36 would live two VLANs/subnets with Internet-only access

I'll likely still have to test this for management's sake, but could this design work? Thanks!

[KarstenI · Accepted solution]

This will work. The Z3 has 802.3af power and that is enough for the MR36.

If it is only for internet-access, even the access-control is easily done.

[Mike_P1]

Glad to hear it, Karsten! I sincerely appreciate the response!!