AIR-PWRINJ30= and MR34

[Grishazahid]

Hello community!

I have Cisco Aironet AIR-PWRINJ30=. Is it safe to use this power injector with MR34 acces point?

I didn't find any documentation for this case, so decided to ask here.

[antonis_sp]

You should be fine. PoE is a universal standard.

[SoCalRacer]

Here is an response from a Meraki rep

Powering MR33 with Ubiquity Power Injector model GP-A240-050 

Some other info related to PoE injectors

https://documentation.meraki.com/MR/Other_Topics/MR_Access_Point_power_supplies_and_cost_calculation...

Specs for the Meraki injectors

https://meraki.cisco.com/lib/pdf/meraki_datasheet_poe_8023af.pdf

[MerakiGeoff]

Hi there,

It looks like that PoE injector is 802.3at capable according to the Cisco website: https://www.cisco.com/c/en/us/products/collateral/wireless/aironet-antennas-accessories/eos-eol-noti.... The MR34 requires 802.3at PoE+ to fully work, so this one will be fine to use with it.

[Grishazahid · Accepted solution]

I decided not to use this injector. Point was succesfully connected to new Meraki Power injector

Thanks all for replies