Products
Platform
General
Public groups
Hello community!
I have Cisco Aironet AIR-PWRINJ30=. Is it safe to use this power injector with MR34 acces point?
I didn't find any documentation for this case, so decided to ask here.
Solved! Go to solution.
I decided not to use this injector. Point was succesfully connected to new Meraki Power injector
Thanks all for replies
View solution in original post
Here is an response from a Meraki rep
Powering MR33 with Ubiquity Power Injector model GP-A240-050
Some other info related to PoE injectors
https://documentation.meraki.com/MR/Other_Topics/MR_Access_Point_power_supplies_and_cost_calculation...
Specs for the Meraki injectors
https://meraki.cisco.com/lib/pdf/meraki_datasheet_poe_8023af.pdf
Hi there,
It looks like that PoE injector is 802.3at capable according to the Cisco website: https://www.cisco.com/c/en/us/products/collateral/wireless/aironet-antennas-accessories/eos-eol-noti.... The MR34 requires 802.3at PoE+ to fully work, so this one will be fine to use with it.