priority setting in ap's

SOLVED
marodrig
Conversationalist

priority setting in ap's

I have 6 meraki MR46 ap's these are distributed in the company but we are having the problem since there are devices that do not connect to the closest ap, is there any way to move clients between ap's or some configuration so that it is done automatically?

1 ACCEPTED SOLUTION
ww
Kind of a big deal
Kind of a big deal

https://documentation.meraki.com/MR/Other_Topics/Client_Balancing

 

At some client wifi drivers you can also tweak roaming aggressiveness

 

You could also look at your wifi desing/ lowering transmit power if they currently have to much overlap https://documentation.meraki.com/MR/Radio_Settings/Transmit_Power_and_Antenna_Configuration

View solution in original post

3 REPLIES 3
ww
Kind of a big deal
Kind of a big deal

https://documentation.meraki.com/MR/Other_Topics/Client_Balancing

 

At some client wifi drivers you can also tweak roaming aggressiveness

 

You could also look at your wifi desing/ lowering transmit power if they currently have to much overlap https://documentation.meraki.com/MR/Radio_Settings/Transmit_Power_and_Antenna_Configuration

marodrig
Conversationalist

thanks for the answer and support

 

happy new year @ww @alemabrahao 

alemabrahao
Kind of a big deal
Kind of a big deal

As @ww said you can try to change some configurations, but remember that roaming is a client decision.

 

 

https://documentation.meraki.com/MR/Wi-Fi_Basics_and_Best_Practices/Client_roaming_and_connectivity_....

I am not a Cisco Meraki employee. My suggestions are based on documentation of Meraki best practices and day-to-day experience.

Please, if this post was useful, leave your kudos and mark it as solved.
Get notified when there are additional replies to this discussion.
Welcome to the Meraki Community!
To start contributing, simply sign in with your Cisco account. If you don't yet have a Cisco account, you can sign up.
Labels