Using more then one interface

SOLVED
diablo24
Building a reputation

Using more then one interface

Hi,

 

Would there be instances where a user would use both physical interfaces on an MR device? If so, would they ever use both to separate traffic between SSIDs?

 

Thanks in advance!

1 ACCEPTED SOLUTION
PhilipDAth
Kind of a big deal
Kind of a big deal

Only the MR53 and above have two interfaces, and they are only used to increase the bandwidth to the AP using channelling/bonding.

https://documentation.meraki.com/MR/Installation_Guides/MR52%2F%2F53_Installation_Guide#Ethernet_Por...

 

They can not be used to separate traffic between SSIDs.

View solution in original post

2 REPLIES 2
PhilipDAth
Kind of a big deal
Kind of a big deal

Only the MR53 and above have two interfaces, and they are only used to increase the bandwidth to the AP using channelling/bonding.

https://documentation.meraki.com/MR/Installation_Guides/MR52%2F%2F53_Installation_Guide#Ethernet_Por...

 

They can not be used to separate traffic between SSIDs.

diablo24
Building a reputation

@PhilipDAth

 

Thank you!

Get notified when there are additional replies to this discussion.
Welcome to the Meraki Community!
To start contributing, simply sign in with your Cisco account. If you don't yet have a Cisco account, you can sign up.
Labels