Two MR in two different office, inter-communicate

SOLVED
James12
Here to help

Two MR in two different office, inter-communicate

i have a request to set up our remote office with a new MR.

how do I route the traffic from the remote office to the existing office network?
current office using VLAN 10 with an MX 64 as our gateway.
The remote office will be VLAN 20.

DHCP service will be on our MX 64.
Can the remote office network route into the current network ?

 

1 ACCEPTED SOLUTION
DarrenOC
Kind of a big deal
Kind of a big deal

Hi @James12 

 

you will require a concentrator for your MR at the Branch office to communicate back to at the HQ.

 

Do both sites currently have an MX? Can you create a site to site vpn or auto vpn between sites to route your traffic.

 

a few options but depends on your current setup

Darren OConnor | doconnor@resalire.co.uk
https://www.linkedin.com/in/darrenoconnor/

I'm not an employee of Cisco/Meraki. My posts are based on Meraki best practice and what has worked for me in the field.

View solution in original post

2 REPLIES 2
DarrenOC
Kind of a big deal
Kind of a big deal

Hi @James12 

 

you will require a concentrator for your MR at the Branch office to communicate back to at the HQ.

 

Do both sites currently have an MX? Can you create a site to site vpn or auto vpn between sites to route your traffic.

 

a few options but depends on your current setup

Darren OConnor | doconnor@resalire.co.uk
https://www.linkedin.com/in/darrenoconnor/

I'm not an employee of Cisco/Meraki. My posts are based on Meraki best practice and what has worked for me in the field.

remote office only has a cisco router as the gateway.

Get notified when there are additional replies to this discussion.
Welcome to the Meraki Community!
To start contributing, simply sign in with your Cisco account. If you don't yet have a Cisco account, you can sign up.
Labels