Struggeling internal IP's after POC deployment

[thomasg94]

Hi

I received a Demo-Kit with an MR33 Access Point - which was installed really simple and fast.

We are using a local Windows DHCP server why we set the AP into bridge mode with dot1x authentication.

Authentication is successful and now the problem begins.

Internet traffic is working fine - alle internal IP's are not reachable (--> redirected to 10.128.128.128) - also my Default Gateway is not reachable.

Thanks for your help

BR

Thomas

[MarcP]

Did you try using a static IP? Still happening?

Strange it is redirecting you to the local status page of the MR...

Shouldn´t be in by default, but maybe it is:

[Seshu]

@thomasg94 Please go to Wireless -> Firewall and Traffic Shaping and make sure Local LAN is allowed for L3 Firewall rules. 

[PhilipDAth · Accepted solution]

I think @Seshu  is likely to be right.  It should look like this:

[NolanHerring]

Double check the access control setting is bridge-mode and not NAT mode