Struggeling internal IP's after POC deployment

SOLVED
thomasg94
Conversationalist

Struggeling internal IP's after POC deployment

Hi

 

I received a Demo-Kit with an MR33 Access Point - which was installed really simple and fast.

We are using a local Windows DHCP server why we set the AP into bridge mode with dot1x authentication.

 

Authentication is successful and now the problem begins.

Internet traffic is working fine - alle internal IP's are not reachable (--> redirected to 10.128.128.128) - also my Default Gateway is not reachable.

 

Thanks for your help

 

BR

Thomas

 

 

1 ACCEPTED SOLUTION
PhilipDAth
Kind of a big deal
Kind of a big deal

I think @Seshu  is likely to be right.  It should look like this:

 

1.PNG

View solution in original post

4 REPLIES 4
MarcP
Kind of a big deal

Did you try using a static IP? Still happening?

 

Strange it is redirecting you to the local status page of the MR...

 

Shouldn´t be in by default, but maybe it is:

2019-08-05 15_48_36-Firewall & traffic shaping - Meraki Dashboard.png

Seshu
Meraki Employee
Meraki Employee

@thomasg94 Please go to Wireless -> Firewall and Traffic Shaping and make sure Local LAN is allowed for L3 Firewall rules. 

PhilipDAth
Kind of a big deal
Kind of a big deal

I think @Seshu  is likely to be right.  It should look like this:

 

1.PNG

Double check the access control setting is bridge-mode and not NAT mode
Nolan Herring | nolanwifi.com
TwitterLinkedIn
Get notified when there are additional replies to this discussion.
Welcome to the Meraki Community!
To start contributing, simply sign in with your Cisco account. If you don't yet have a Cisco account, you can sign up.
Labels