Radius Authentication and GPO to autoconnect to SSID
We currently have Cisco AP's and a Cisco 5500 wireless controller with radius authentication to our internal SSID. There is a computer policy in AD which autoconnects machines to this SSID when a user logs onto a machine.
We are looking at implementing Meraki at one of our sites and replicating the same SSID name and GPO setup going forward.
I have setup a SSID with radius authentication on the meraki controller/NPAS server and a new test policy in AD for autoconnecting to the SSID. The machine is getting the polcy as I have added a deny policy for another SSID which it does however the machine does not want to autoconnect when I login. I can connect manually to the SSID with no problem, has anyone else come across this issue? I'm new to the meraki setup so any help would be appreciate.
The old GPO policy may not have cleared out properly. Open CMD as admin and do a gpupdate /force. Then make sure that the old SSID isn't check marked to auto connect to your current. We usually add our's manually, but once it's setup it'll auto connect without any issues normally.