cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 

Print in Wifi

Building a reputation

Print in Wifi

I have a printer connected to the data segment.

from the wifi I ping the printer and it responds without a problem.

but when adding to the form to a Windows machine it does not find it.

those computers where I can not add the printer are in domain.

I try to add the printer on a computer that is not in domain and I can add it without any problem.

 

That could be happening ????

Note: I do not administer the domain.

3 REPLIES 3
Conversationalist

Re: Print in Wifi

I could not print on WiFi when I first got my APs installed. Is the access control configuration for that SSID set to Bridge mode? Bridge mode is what fixed it for me.

Meraki Alumni (Retired)

Re: Print in Wifi

It sounds like your domain admins may have pushed a GPO or policy that doesn't allow additional printers to be added. 

 

If it works with a client connected to same SSID (or IP subnet) as the domain PC than that doesn't sound like a firewall rule or anything the wireless or underlying switch infrastructure is preventing.

 

 

 

Highlighted
Building a reputation

Re: Print in Wifi

in case it's at the firewall level that could be because I was checking and I did not see anything strange

Welcome to the Meraki Community!
To start contributing, simply sign in with your Cisco account. If you don't yet have a Cisco account, you can sign up.