Meraki Trusted Access -- Agent-less onboarding between Meraki APs, Systems Manager, and wireless endpoints
Please note, this is not an exhaustive list of all MR documentation or features. More advanced documentation beyond the basic features can be found at documentation.meraki.com!
If you're interested in learning about Meraki's training offerings, be sure to check out The Meraki Learning Hub! There you'll find tons of great information about Meraki led training like CMNA and ECMS.
I have a Z3 at home which connects via my home broadband to get corporate network in my house. I need to expand the wireless connection to an outbuilding. Is it possible to connect an MR33 to the Z3 PoE port and use that AP in bridge mode?
Hey @icecold ! You sure can -- the Z3 series has one ethernet port dedicated to PoE (identified with a lightning bolt), so you can simply plug your MR33 into the Z3's port to power it on. From there, you can configure your MR33 in bridge mode to let DHCP traffic pass through to your Z3. You can configure bridge mode on your AP on the Access Control page, and configure DHCP on your Z3 on its Routing & DHCP page.
The documentation for the Z3 and MR33 are excellent references for getting started. Good luck, and happy networking!