Meraki MR Templates with different MR models

Here to help

Meraki MR Templates with different MR models

Hi there,


I have a question about using the Meraki Mixed Templates with, is it possible to have different Meraki MR models for a unique Template? I mean for a Network managed from a template is it posible to have one MR33 and one MR20? Understanding thatthe MR20 doesn't support the 3rd (2.4 GHz & 5 GHz WIDS/WIPS, spectrum analysis, and location analytics radio) and 4th Radio's (2.4 GHz Bluetooth Low Energy (BLE) radio with beacon and BLE scanning support)


So, the MR20 will do the channel assignment, channel width (Only at 5.0Ghz) and the Radio transmit power range (Tx) automatically like the MR33 in that Branch? Or it need the 3er radio to do that? 


Hope you can help me with this.


Kind of a big deal

I have never seen an option for doing this.

Get notified when there are additional replies to this discussion.
Welcome to the Meraki Community!
To start contributing, simply sign in with your Cisco account. If you don't yet have a Cisco account, you can sign up.