Meraki Firmware Upgrade for MR32s

SOLVED
PhilCS
New here

Meraki Firmware Upgrade for MR32s

Meraki says that MR32s can only run the latest version of 26.x.x, but the changelog says that we can install the latest version of 28.6.1, the MR32 will run MR 26.8.3.  So can the firmware on these MR32s be upgraded to 28.6.1?

1 ACCEPTED SOLUTION
Brash
A model citizen

No, the maximum runnable firmware for MR32's is version 26.

If you have newer AP's in the same network and apply the 28 firmware upgrade, the newer AP's will run 28 while the MR32's will remain on 26

 

https://documentation.meraki.com/General_Administration/Firmware_Upgrades/Product_Firmware_Version_R...

View solution in original post

2 REPLIES 2
Brash
A model citizen

No, the maximum runnable firmware for MR32's is version 26.

If you have newer AP's in the same network and apply the 28 firmware upgrade, the newer AP's will run 28 while the MR32's will remain on 26

 

https://documentation.meraki.com/General_Administration/Firmware_Upgrades/Product_Firmware_Version_R...

PhilCS
New here

Thanks Brash for your help!

Get notified when there are additional replies to this discussion.
Welcome to the Meraki Community!
To start contributing, simply sign in with your Cisco account. If you don't yet have a Cisco account, you can sign up.