Hello ,
I want to installed MR33 hotel and allowed guest to connect to the internet internet .For that what would be the best practices? .Which method should i used to allow guest access.any recommendation
Solved! Go to solution.
Ok, there is more than the splash-page.
As always: "it depends". Best you go through all the possibilities that you have with Meraki-Splash-pages and pick the one that fits your need. Here are some documents to start:
https://documentation.meraki.com/zGeneral_Administration/Cross-Platform_Content/Splash_Page
https://documentation.meraki.com/MR/MR_Splash_Page/Splash_Page_Details_for_Meraki_MR
Hi Karstenl ,
Thanks for the reply .I will check all the possibilities but it would be very helpful if you suggest as a best Practice which one is used widely in hotel industries for Guest access
I do not think that there are general best practices. But there are different goals that a hotel could have. Some want to make money with the WLAN, some want to provide best guest experience. As a traveler, I of course prefer the second goal.
If your local rights allow this, I would go for the "click through" splash page. The guest has to accept an "acceptable use policy" and is connected to the internet. That is very convenient for the guest.
Ok, there is more than the splash-page.
Thanks for your great support .It would be very helpfull.