MR-76/MR-86 mounting position

SOLVED
replicant
Here to help

MR-76/MR-86 mounting position

G'day,

 

I have two networks with different mounting positions of MR-76s using MA-ANT-20s. I've understood from consultants that mounting vertically is the most preferred way to do things with this setup. However, an installer recently mounted them horizontally in a location. 

 

Their performance as a horizontal mount doesn't appear to match that of a vertical mount. Both mounts stand between 8 and 9.5 metres above the floor.

 

Has anyone's experience in their deployments shown one mounting to be better than another?

1 ACCEPTED SOLUTION
MarcP
Kind of a big deal

It is the same with MR-74, tested it (need to use them temporary indoor, firstly I just put it on a table)

vertically is much better than horizontally, I can confirm this.

 

surely it is regarding to the MA-ANT-20 design. 

View solution in original post

1 REPLY 1
MarcP
Kind of a big deal

It is the same with MR-74, tested it (need to use them temporary indoor, firstly I just put it on a table)

vertically is much better than horizontally, I can confirm this.

 

surely it is regarding to the MA-ANT-20 design. 

Get notified when there are additional replies to this discussion.
Welcome to the Meraki Community!
To start contributing, simply sign in with your Cisco account. If you don't yet have a Cisco account, you can sign up.
Labels