ESL in template

Solved
MX
Here to help

ESL in template

Hi!

you can read a alot in this document ragarding ESL:
https://documentation.meraki.com/MR/Deployment_Guides/SES-imagotag_Electronic_Shelf_Labels_(ESL)_Int...

 

If we want to activate ESL in an template with mixed AP supported(mr44) and no supported(mr42). Can you activate ESL anyway?

Will ble beacon function deactivate on all ap in that template or particular ap that you really activate ESL on? 

MS
1 Accepted Solution
MX
Here to help

Good to know @AlexanderN . Then a try to reach support again, to activate that on our templates.(last time the didnt know that)

MS

View solution in original post

3 Replies 3
alemabrahao
Kind of a big deal
Kind of a big deal

@MX.,

 

The documentation say that It will be deactivated just on access points that you are enabling ESL.

I am not a Cisco Meraki employee. My suggestions are based on documentation of Meraki best practices and day-to-day experience.

Please, if this post was useful, leave your kudos and mark it as solved.
AlexanderN
Meraki Employee
Meraki Employee

Hi @MX ,

 

SES ESL integration is a per-AP feature. If you use a template, ESL needs to be enabled on a template level, and a V:Cloud URL needs to be set (assuming that you are using the direct connection to V:Cloud). Then,  ESL functionality must be activated on individual APs within each child network.

 

Screenshot at Sep 21 16-40-34.png

 

There is no impact on BLE functionality for APs that don't have ESL enabled unless you explicitly turn off BLE on the template level.

 

MX
Here to help

Good to know @AlexanderN . Then a try to reach support again, to activate that on our templates.(last time the didnt know that)

MS
Get notified when there are additional replies to this discussion.
Welcome to the Meraki Community!
To start contributing, simply sign in with your Cisco account. If you don't yet have a Cisco account, you can sign up.
Labels