service meraki connect source interface ?

[thomasthomsen]

How can you define the source interface of "service meraki connect" on a Catalyst switch you want to use for cloud monitor (Or cloud managed device config or what ever its called today).
Its easy if you have a access switch with just one L3 interface and a 0.0.0.0 route.

But what about a core switch that might have multiple L3 interfaces, that might not all be allowed towards the internet ?

[alemabrahao]

I think this is not possible because the source interface is automatically selected based on the routing table and the availability of a default route.

[Brash]

My understanding from the doc is that this sets the source interface for the cloud communication:

To resolve DNS names and communicate with the Meraki Dashboard, the Catalyst switch will need the following configuration.

• "internet bound" vlan configured as http client source-interface 
  

https://documentation.meraki.com/MS/Cloud_Management_with_IOS_XE/Migration_from_CLI-managed_Catalyst...

That said, I haven't tested it myself so I can't say 100%.