I am trying to configure an uplink port but the switch (MS120) remains orange. I have no experience with Meraki so I guess it is something simple that I have missed. All help is appreciated.
My uplink port:
Typ: Trunk
Native vlan: 1
Allowed vlans: all
RSTP: enabled
STP guard: disabled
Port schedule: Unscheduled
Port isolation: Disabled
-------------------------------
Thank you all for all help. It is now solved but unfortunately I am not sure what the problem was. Maybe it just took some time for the switches to get the configuration. Anyhow, now it works.
Is this a brand new Meraki Switch? If so, does that VLAN have Internet access and DHCP configured?
If so then check the switches local status page to see what it is complaining about.
Yes, it is brand new. It is set to receive IP from DHCP and the VLAN have internet access but for some reason the switch will not receive any IP. That is what I am trying to do with the uplink port. The status page in the Dashboard telling me this: "Has never connected to the Meraki cloud".
I looked at the link but it don't look the same for me. I don't have the uplink configuration tab.
Dashboard: Switch\Switches\clicking on the switch and the status page open.
Has your upstream switch got any security features configured like BPDU guard or port security?
You need to look at the local status page to see what the Meraki switch is reporting.
@abcd wrote:
My uplink port:
Typ: Trunk
Native vlan: 1
Allowed vlans: all
RSTP: enabled
STP guard: disabled
Port schedule: Unscheduled
Port isolation: Disabled
This looks an awful lot like the settings for an MS switchport. If your switch cannot reach the dashboard then setting these values in the dashboard is not going to help you yet. You switch first needs to be connected to the dashboard before you can configure it via the dashboard.