This device is using a DHCP IP address from VLAN 11 instead of using configured VLAN 1

Hameed
Here to help

This device is using a DHCP IP address from VLAN 11 instead of using configured VLAN 1

Access switch status showing "This device is using a DHCP IP address from VLAN 11 instead of using configured VLAN 1" and when I check the core switch, I found the "STP discarding packets from this port" message. Recently we did not make any changes and how to resolve it. Please help. Thank you

3 Replies 3
Roger_Beurskens
Building a reputation

First try to solve your STP issue and/or check if the active uplink port has alle the vlans it needs so the switch can reach it's normal management vlan.
Hameed
Here to help

@Roger_Beurskens Thank you very much for your reply. Some IP phones created the issue and now it is resolved. Thank you

rajivdaniel
Conversationalist

Hameed, what was the issue with the IP Phone? I am having similar issues.

 

-Rajiv


I am not a Cisco Meraki employee. My suggestions are based on documentation of Meraki best practices and day-to-day experience.

Please, if this post was useful, leave your kudos and mark it as solved.
Get notified when there are additional replies to this discussion.
Welcome to the Meraki Community!
To start contributing, simply sign in with your Cisco account. If you don't yet have a Cisco account, you can sign up.
Labels