Target firmware version not available under firmware upgrade

SOLVED
himanshu29
Here to help

Target firmware version not available under firmware upgrade

As we all know the latest stable release candidate for switches is MS12.28.1 ,but i would like to upgrade to 12.33 which is not showing while scheduling the upgrade 

 

For 12.28.1 there is new bug for MS 120 switches , that printer IP gets changed when ever switch reboots .

 

Meraki TAC suggested to upgrade to 12.33 , but its not showing under firmware upgrade 

1 ACCEPTED SOLUTION

Accepted Solutions
cmr
Kind of a big deal
Kind of a big deal

Re: Target firmware version not available under firmware upgrade

@himanshu29 12.33 was replaced by 14.22 as the stable release candidate.  14.22 is now a pretty good release (we run all our switches on 14.x).

View solution in original post

8 REPLIES 8
Inderdeep
Kind of a big deal

Re: Target firmware version not available under firmware upgrade

@himanshu29 : check out firmware upgrade as network admin in below link

https://documentation.meraki.com/General_Administration/Firmware_Upgrades/Managing_Firmware_Upgrades

Regards
Inderdeep Singh
www.thenetworkdna.com ( Awarded by Cisco IT Blogs award 2020)
himanshu29
Here to help

Re: Target firmware version not available under firmware upgrade

the issue is 12.33 for MS switches is not appearing as next upgrade for me 

 

i have access to all the org 

Inderdeep
Kind of a big deal

Re: Target firmware version not available under firmware upgrade

@himanshu29 : Can you go to  Organization --> Firmware upgrade and select Switch first and then click on the Schedule upgrade and check what Target upgrade is available for your switch ?

Regards
Inderdeep Singh
www.thenetworkdna.com ( Awarded by Cisco IT Blogs award 2020)
himanshu29
Here to help

Re: Target firmware version not available under firmware upgrade

not appearing the desired 12.33 version

 

himanshu29_0-1621874073403.png

 

Inderdeep
Kind of a big deal

Re: Target firmware version not available under firmware upgrade

You need to talk with Meraki Support and they will arrange for you on your dashboard !

Regards
Inderdeep Singh
www.thenetworkdna.com ( Awarded by Cisco IT Blogs award 2020)
cmr
Kind of a big deal
Kind of a big deal

Re: Target firmware version not available under firmware upgrade

@himanshu29 12.33 was replaced by 14.22 as the stable release candidate.  14.22 is now a pretty good release (we run all our switches on 14.x).

View solution in original post

himanshu29
Here to help

Re: Target firmware version not available under firmware upgrade

they havent done yet , we have to wait for 12.33 to be enabled for our org 

himanshu29
Here to help

Re: Target firmware version not available under firmware upgrade

Meraki support said same , but we have 500 + MS 120 . But we can give it a try with few switches .

Welcome to the Meraki Community!
To start contributing, simply sign in with your Cisco account. If you don't yet have a Cisco account, you can sign up.