Switch Replacement with Meraki

[Acepak1]

Which are the best Meraki suitable switches to replace below Cisco Switches

WS-C3850-48T & WS-C3850-48P
WS-C3750X-48 & WS-C3750X-48P

[redsector]

I took the MS425 to replace the WS-C3750X-48

[PhilipDAth]

I would recommend going to this page:
https://meraki.cisco.com/products/switches/models/ 

And then go down one page, and tick all the features you need in a switch and see what comes up.

You could be looking at anything from an MS250-48 and up.

[cmr]

@Acepak1 we have replaced about 20x WS-C3850-48P and -24P with MS355-48X and 24X so far and it has generally gone very well.  In most ways they are an upgrade and you could consider a lesser switch such as an MS250 if you don't want mGig or QSFP+ ports.  As we wanted both the MS355s were a no-brainer.  Do be aware that you cannot run the same level of access lists on the MS switches as you can on the Catalyst models that you are replacing.