i have 2*C9300X-12Y-M Meraki Catalys switches , one of them connected to firewall & online at the portal
is it reuire to connect the other switch to internet source or just will be onlie though connecting the stack cable with the other managed switch
Solved! Go to solution.
If the stack has formed then only one switch needs to be connected, if they haven't completed the stacking process yet, both need to be connected.
I would recommend bringing them online individually first, ensure they have been upgraded, and then stack them.
Expect the first time boot, coming online in the dashboard and firmware upgrade to take the better part of 20-30 minutes.
yes the both switches already upgraded to same firmware , i asked if only one switch online enough to other switch to discover at the stack , or it must both switches be online
thanks
If the stack has formed then only one switch needs to be connected, if they haven't completed the stacking process yet, both need to be connected.
ok thanks
i think also that you need to connect both switches to be online even after the stack to avoid failure senario for the connected one
It is common good practice to have two switches per stack connected, if the upstream device is an MX, only one will transmit at once, but it does provide failover.