Splash Access on switch level

[Alexs20]

Hello,

Is it possible to activate and configure Splash pages on Switch level (based on VLANS)?

So any device that connects to the network via wire will see the captive portal

Thanks

[ww]

No

You need mx for that (L3 vlan on mx)

https://documentation.meraki.com/MX/Access_Control_and_Splash_Page/Access_Control

[KarstenI]

As @ww correctly mentioned, not natively. But if you have the strict business requirement to do this, you could achieve this with the Cisco ISE. But if you have a RADIUS server like the ISE, implementing 802.1X is always the better option.