Server Rack Mounting a MS120-8

[Kinzar]

Are there any solutions to this?

I thought that (https://documentation.meraki.com/MS/Installation_Guides/MS120-8_Series_Installation_Guide#Package_co...) under "mounting hardware" would do the trick, but I didn't release I was looking at the bottom of the unit! It looks like this is for a wall mount only... We would like to place two of these as our edge switched in a server rack.

Thanks

[Mr_IT_Guy]

We had a spare 1U shelf laying around so we just used that.

[MilesMeraki]

Yeah, my recommendation would be to look on ebay to see if you can get some of the extendable ears you use to be able to get with these smaller units. Otherwise, a 1RU shelf will be the answer. 

[MichelRueger]

Hi,

Have a look at https://www.rackmount.it/de/broschueren.html they have already a solution for the Cisco Meraki Firewall MX64 and MX64.

As the MX64 is not much smaller than the MS120-8 it could work.

MX d/w/h 13cm/23.9cm/2.5cm

MS d/w/h 15cm/22.2cm/2.8cm

Thea also write that they do individual Collor and sice!