Mar 12 2025
6:18 AM
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Mar 12 2025
6:18 AM
SNMP restrict SNMP direct polling
Is it possible to restrict SNMP direct polling same as Dashboard access have "IP restrictions list?
//Ronny
Solved! Go to solution.
Labels:
- Labels:
-
Other
1 Accepted Solution
Mar 12 2025
6:23 AM
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Mar 12 2025
6:23 AM
You can restrict MXs WAN SNMP Polling on the firewall page, but otherwise there is not.
If you found this post helpful, please give it Kudos. If my answer solves your problem please click Accept as Solution so others can benefit from it.
2 Replies 2
Mar 12 2025
6:23 AM
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Mar 12 2025
6:23 AM
You can restrict MXs WAN SNMP Polling on the firewall page, but otherwise there is not.
If you found this post helpful, please give it Kudos. If my answer solves your problem please click Accept as Solution so others can benefit from it.
Mar 12 2025
6:23 AM
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Mar 12 2025
6:23 AM
IP restrictions must be configured to restrict SNMP access to particular IP addresses in the customer environment when using v2c. SNMP versions 1 and 2 send the community string in clear text, so IP restrictions are required to prevent unauthorized SNMP access if the community string is intercepted or learned by another party. They are recommended for v3 but not required.
SNMP Overview and Configuration
If you found this post helpful, please give it Kudos. If my answer solves your problem please click Accept as Solution so others can benefit from it.

Get notified when there are additional replies to this discussion.