SFP-H25G-CU1M is compatible with C9300X-24Y-M and C9300X-12-Y-M

[Rakeshelar]

SFP-H25G-CU1M DAC calbe is compatible with C9300X-24Y-M and C9300X-12-Y-M?

We are using C9300x-24Y-M as core and C9300X-12-Y-M as distrbution switch with C9300X-NM-8Y-M network uplink modules.

[alemabrahao]

Yes, it is.

https://tmgmatrix.cisco.com/?npid=4303&npid=4301

[Rakeshelar]

@alemabrahao Thanks for the link. These are the Meraki switches and network modules are C9300X-NM-8Y-M. In Meraki SFP datasheet we did not found 25gig DAC CABLE. So, I am reconfirming the 25g DAC cable used for C9300X-24-Y is compatible Meraki c9300X-24Y-M switches or not.

[alemabrahao]

In fact, these switches are what we call dual-person, meaning they can run both traditional Cisco IOS and Meraki.

So the information provided is correct.

[GIdenJoe]

These switches always run IOS-XE in the background and I would recommend going over to IOS-XE version.
If you are still running CS17.x then you are running IOS-XE but with a container running on the apphosting part of the switch to translate your config.

The reason I say this is that when you run IOS-XE without the container you will have access to the CLI via dashboard cloud cli.  And when plugging in your Cisco DAC cables you will be able to do show inventory and show interface to see your DAC cable will work just fine 😉

[GIdenJoe]

As @alemabrahao already mentioned tmgmatrix.cisco.com is valid as a source of compatibility checking.
This is confirmed on the Meraki documentation page found here:

https://documentation.meraki.com/Platform_Management/Product_Information/Overviews_and_Datasheets/Sm...