Remove DHCP server on MS120

[ChaVyzPro]

Hi all,

I don't know why but DHCP server on MS120 have been configured all alone ???

after upgrading firmware yesterday ?

How to remove this, the wrong DHCP server Meraki is block and the right one Allowed

But after real reboot clients, they still have the wrong ip address . . . 

Kinds regards,

[alemabrahao]

I suggest you open a support case.

[ChaVyzPro]

Hi

ok case already open, still working on it, but no hopes for the moment 

[BlakeRichardson]

Owch... Hopefully the issue hasn't caused too many problems for you. 

[ChaVyzPro]

Hi

a little, but static ip is working . . .  DHCP ip no...

[ChaVyzPro]

How can I downgrade MS firmware please ?

[alemabrahao]

https://documentation.meraki.com/General_Administration/Firmware_Upgrades/Managing_Firmware_Upgrades

[ChaVyzPro]

Hi,

Thanks but ...

I have read and try these two things but not working, or permitting me to do that

Rescheduling or Canceling a Firmware Upgrade

Rolling Back a Recent Firmware Upgrade

[ChaVyzPro]

Solution ? change switch ... 

[Kyle_Smith]

I would check to make sure the management port is not connected to the network, since it will serve DHCP. This is so that you're able to connect to the local status page without setting a static IP.

https://documentation.meraki.com/General_Administration/Tools_and_Troubleshooting/Using_the_Cisco_Me...