Recommendation to connect a Cisco WLC with Lag enabled to a Meraki switch (MS425) in a port channel?

DThomaz
Conversationalist

Recommendation to connect a Cisco WLC with Lag enabled to a Meraki switch (MS425) in a port channel?

Do you guys have a recommendation to connect a Cisco WLC with Lag enabled to a Meraki switch (MS425) in a port channel?

 

Thanks,

 

-Dave

2 REPLIES 2
PhilipDAth
Kind of a big deal
Kind of a big deal

You can use LACP.

https://documentation.meraki.com/zGeneral_Administration/Tools_and_Troubleshooting/Link_Aggregation_... 

 

Can't say I have ever bothered using LACP with a WLC.  I normally just configure primary and backup ports.  Keeps everything simple then.

GIdenJoe
Kind of a big deal
Kind of a big deal

@PhilipDAth, an AireOS based Cisco WLC does not have the ability to do LACP, only static LAG is supported.

So basically you cannot do this with a Meraki switch.
You'll only be able to use the classic one port active for an interface and another backup.

Get notified when there are additional replies to this discussion.
Welcome to the Meraki Community!
To start contributing, simply sign in with your Cisco account. If you don't yet have a Cisco account, you can sign up.
Labels