Port RSTP Role Change / Port Status Change

[Zedster1974]

Afternoon

I'm seeing dozens, of these Event Types on our switches - even when nothing is plugged into the ports that are being affected - such as below

Does anyone have any ideas as to how to prevent - or is it fine - 

FYI - New to Meraki Switches so have only previously used ubiquti. 

Feb 28 15:36:39		Port RSTP role change	Port 14 designated→disabled
Feb 28 15:36:39		Port status change	port: 14, old: 1Gfdx, new: down
Feb 28 15:35:20		Port RSTP role change	Port 14 disabled→designated
Feb 28 15:35:20		Port status change	port: 14, old: down, new: 1Gfdx
Feb 28 15:35:17		Port RSTP role change	Port 14 designated→disabled
Feb 28 15:35:17		Port status change	port: 14, old: 10fdx, new: down
Feb 28 15:35:09		Port RSTP role change	Port 14 disabled→designated
Feb 28 15:35:09		Port status change	port: 14, old: down, new: 10fdx
Feb 28 15:35:06		Port RSTP role change	Port 14 designated→disabled
Feb 28 15:35:06		Port status change	port: 14, old: 1Gfdx, new: down
Feb 28 15:34:33		Port RSTP role change	Port 14 disabled→designated
Feb 28 15:34:33		Port status change	port: 14, old: down, new: 1Gfdx
Feb 28 15:34:29		Port RSTP role change	Port 14 designated→disabled
Feb 28 15:34:29		Port status change	port: 14, old: 10fdx, new: down
Feb 28 15:34:21		Port RSTP role change	Port 14 disabled→designated
Feb 28 15:34:21		Port status change	port: 14, old: down, new: 10fdx
Feb 28 15:34:19		Port RSTP role change	Port 14 designated→disabled
Feb 28 15:34:19		Port status change	port: 14, old: 1Gfdx, new: down
Feb 28 15:33:32		Port RSTP role change	Port 14 disabled→designated
Feb 28 15:33:32		Port status change	port: 14, old: down, new: 1Gfdx
Feb 28 15:33:28		Port RSTP role change	Port 14 designated→disabled
Feb 28 15:33:28		Port status change	port: 14, old: 10fdx, new: down
Feb 28 15:33:14		Port RSTP role change	Port 14 disabled→designated
Feb 28 15:33:14		Port status change	port: 14, old: down, new: 10fdx
Feb 28 15:33:11		Port RSTP role change	Port 14 designated→disabled
Feb 28 15:33:11		Port status change	port: 14, old: 1Gfdx, new: down

[MasG · Accepted solution]

Hello Zedster1974, 

Is not expected to see port status changes on ports that do not have anything connected. Therefore the best possible action is to contact Meraki Support for live help in troubleshooting the issue.