Policy Based Routing on Meraki Switches

SOLVED
rahirahisystems
Conversationalist

Policy Based Routing on Meraki Switches

I just want to know if I can selectively match traffic and redirect them onto an Uplink L3 or SVI Interface (possibly with ECMP) on Meraki switches. 

If I cannot do this - can I match and redirect the traffic similar to VACL Redirect on the Catalyst switches and rely on an upstream router to do PBR ? 

1 ACCEPTED SOLUTION
PhilipDAth
Kind of a big deal
Kind of a big deal

Their is no policy routing available with the MS family.

 

You can only do normal forwarding - based on the destination address.

View solution in original post

4 REPLIES 4
PhilipDAth
Kind of a big deal
Kind of a big deal

Their is no policy routing available with the MS family.

 

You can only do normal forwarding - based on the destination address.

Thanks for the quick response. Is there any other provision to redirect subset of traffic to a specific port ?

 

Thanks.

No. 

MXITCA
Conversationalist

Hi

 

Like it is 2023 and till now Meraki doesn't support Policy based routing on their switches.. they shouldn't sell them as layer 3 switches simply because you don;t need to trunk them to a router and have a rudimentary ACL

Get notified when there are additional replies to this discussion.
Welcome to the Meraki Community!
To start contributing, simply sign in with your Cisco account. If you don't yet have a Cisco account, you can sign up.
Labels