cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 

Null Interface on Meraki Switches

SOLVED
Here to help

Null Interface on Meraki Switches

Hello All ,

 

Wanted to check if it is possible to add static route to a null interface ( like in Catalyst switches) to prevent routing loops in Meraki L3 switches? If not, is there any other similar feature available in Meraki L3 switches ?

 

Thanks in advance.

 

Rgds,

 

Soby

1 ACCEPTED SOLUTION

Accepted Solutions
Highlighted
Here to help

Re: Null Interface on Meraki Switches

Thank you.. Will try this workaround.

View solution in original post

2 REPLIES 2
Highlighted
Kind of a big deal

Re: Null Interface on Meraki Switches

No.

 

I guess you could add a static route to a non-existant next hop that is on a directly connected interface.

Highlighted
Here to help

Re: Null Interface on Meraki Switches

Thank you.. Will try this workaround.

View solution in original post

Welcome to the Meraki Community!
To start contributing, simply sign in with your Cisco account. If you don't yet have a Cisco account, you can sign up.