Need Specific Stack cable model for MS225-24 p

Solved
Sudeep_1010
Just browsing

Need Specific Stack cable model for MS225-24 p

Can any one advice me the specific stack cable model for stacking MS 225-24 p switch.

 

Thanks in advance.

 

 

1 Accepted Solution
cmr
Kind of a big deal
Kind of a big deal

They come in different lengths, the 1m is MA-CBL-40G-1M and the other lengths are 0.5m and 3m.

View solution in original post

4 Replies 4
cmr
Kind of a big deal
Kind of a big deal

They come in different lengths, the 1m is MA-CBL-40G-1M and the other lengths are 0.5m and 3m.

alemabrahao
Kind of a big deal
Kind of a big deal

https://meraki.cisco.com/product/switches/switches-accessories/ma-cbl-40g-1m/

https://meraki.cisco.com/product/switches/switches-accessories/cbl-40g-3m/

 

 

I am not a Cisco Meraki employee. My suggestions are based on documentation of Meraki best practices and day-to-day experience.

Please, if this post was useful, leave your kudos and mark it as solved.
Ryan_Miles
Meraki Employee
Meraki Employee

It's all listed here https://documentation.meraki.com/General_Administration/Cross-Platform_Content/SFP_and_Stacking_Acce...

Ryan / Meraki Solutions Engineer

If you found this post helpful, please give it Kudos. If my answer solves your problem please click Accept as Solution so others can benefit from it.
Sudeep_1010
Just browsing

Thanks...

Get notified when there are additional replies to this discussion.