MS425 How to connect Storage Server?

SOLVED
WilliamQin
Getting noticed

MS425 How to connect Storage Server?

Hi  Everyone ,    I have some question,  I need some help , I have MS425 Switch, but the MS 425 Core Switch not 10G electrical port,  I need 10G electrical port connect my Storage Server,  So  everyone , do you have kosher Light-electricity module 10G? can you recommend me ?  Thanks。

1 ACCEPTED SOLUTION

Ok perhaps you mean a 10GBaseT connection, meaning the server has a 10GBaseT copper RJ45 LAN connector?  Meraki does not make a 10GBaseT SFP+ module.  These are not common in the industry.  10GBaseT does consume more power (runs hotter) and has higher latency than using copper twinax direct attach cables or optical modules, so I think it'll be much more common to connect servers via direct attach cables (or optics).  You might be able to use a 3rd party 10GBaseT SFP-10G-T SFP+ module since Meraki does not lock out non-Meraki SFPs, but I don't think it would not be officially supported.  Or perhaps another option is a 3rd party 10GBaseT copper to fiber media converter, and connect your server via Cat6/7 to the RJ45 port and use a Meraki direct attach cable like MA-CBL-TA-1M to connect between the media converter and MS425.  

View solution in original post

10 REPLIES 10
Adam
Kind of a big deal

I'm not fully understanding your request but the MS425 should have 2 or 4 10G SFP+ Fiber ports according to the data sheet.

https://meraki.cisco.com/lib/pdf/meraki_datasheet_ms400-series.pdf

 

I typically only purchase Meraki Fiber SFP's to ensure compatibility and supportability.

https://meraki.cisco.com/lib/pdf/meraki_datasheet_sfp.pdf

Adam R MS | CISSP, CISM, VCP, MCITP, CCNP, ITILv3, CMNO
If this was helpful click the Kudo button below
If my reply solved your issue, please mark it as a solution.

Yes, I know you mean ,  maybe   I description not well ,  Now,I have two MS425,  and one storage server,  the Storage server  is copper wire, i need use copper  wire connect my ms425,    So I need optical fiber transform to copper ,    Do you have a suitable optical fiber  module recommended? 

MerakiDave
Meraki Employee
Meraki Employee

I think I might understand, you're asking for 10G copper (electrical) modules as opposed to fiber (optical) modules. For 10G copper/electrical, also called TwinAx, your options are the 1 meter and 3 meter "direct attach" cables to attach to servers. Those would be MA-CBL-TA-1M and MA-CBL-TA-3M. See "Direct Attach" in this data sheet: https://meraki.cisco.com/lib/pdf/meraki_datasheet_sfp.pdf

HI  ,   I  need 10G copper (electrical) modules  

Ok perhaps you mean a 10GBaseT connection, meaning the server has a 10GBaseT copper RJ45 LAN connector?  Meraki does not make a 10GBaseT SFP+ module.  These are not common in the industry.  10GBaseT does consume more power (runs hotter) and has higher latency than using copper twinax direct attach cables or optical modules, so I think it'll be much more common to connect servers via direct attach cables (or optics).  You might be able to use a 3rd party 10GBaseT SFP-10G-T SFP+ module since Meraki does not lock out non-Meraki SFPs, but I don't think it would not be officially supported.  Or perhaps another option is a 3rd party 10GBaseT copper to fiber media converter, and connect your server via Cat6/7 to the RJ45 port and use a Meraki direct attach cable like MA-CBL-TA-1M to connect between the media converter and MS425.  

yes. you are right,    i already use SFP-10G-T,    I am currently testing it ,I will take your advice, thank for you answer! 

William, have you taken a look at our MS350-24X switches?  These switches provide Multigigabit Ethernet connectivity, which will provide 10Gbps over Cat6 copper cables, as defined by the NBASE-T Alliance.  

 

More information can also be found here: https://meraki.cisco.com/technologies/multigigabit

Yes, I Know this MS350-24X provide Multigigabit Ethernet connectivity, support 10G copper and 10G fiber , but the ms350-24X Cannot meet my needs, I need 26, 10G Fiber cub and 4 10G copper cub, So I Choose the MS425-32X, but the MS425-32X not support 10G copper , So i'm very Tangled, I only choose ms425-32x and 10G copper moudule. .....

10G copper transceiver

or

Cisco Multimode 

 

If I have understood you correctly.

 

 

 

Robin St.Clair | Principal, Caithness Analytics | @uberseehandel
Mio
Here to help

Using 10GBase-T transceiver to connect MS425-32 and storage server. However, Meraki does not make a 10GBaseT SFP+ transceiver. U can purchase one from 10Gtek which have a good compatibility with Meraki.  

 

Here is the website:

https://www.sfpcables.com/sfp-copper-transceiver-10gbase-t-cat-6a-7-20m

Get notified when there are additional replies to this discussion.
Welcome to the Meraki Community!
To start contributing, simply sign in with your Cisco account. If you don't yet have a Cisco account, you can sign up.
Labels