Hi guys, I have some problems with the ping test.
I have MS410 that connected to L2 switch, and NVR#1,2,3,4 connected to L2 switch.
On my dashboard,
1. Network-wide - Monitor - Clients - NVR# - Ping
2. MS410 - Tools - Ping(NVR# 's IP)
3. MS410 - Port - Status - Current clients - NVR# - Ping
NVR#1: 1,2 is fine, but doesn't work on 3.
NVR#2,3,4 : 1,2,3 is fine.
Why doesn't only one NVR work on 3?
![nvr.PNG nvr.PNG](https://community.meraki.com/t5/image/serverpage/image-id/28876i93865F63D431E424/image-size/large?v=v2&px=999)
![port ping.png port ping.png](https://community.meraki.com/t5/image/serverpage/image-id/28877iA722746B829A3083/image-size/large?v=v2&px=999)