cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 

MS410-32 PBR / VRF

SOLVED
Highlighted
Here to help

MS410-32 PBR / VRF

Good Evening

 

My challenge is that I have 2 L3 MPLS, one must be the default route for data and voice vlan + meraki management vlan and the other must be the default route for guest wireless vlan. I know that MS410 does not support PBR or VRF. Any tips how i can accomplish that, whitout truking it to an another L3 device / L3 switch with a seperate routing instanse

 

 

1 ACCEPTED SOLUTION

Accepted Solutions
Highlighted
Kind of a big deal

Re: MS410-32 PBR / VRF

Make the second L3 MPLS circuit the default gateway for the guest traffic, and keep the guest traffic and the L3 MPLS all in one L2 VLAN on the switch.

View solution in original post

2 REPLIES 2
Highlighted
Kind of a big deal

Re: MS410-32 PBR / VRF

Make the second L3 MPLS circuit the default gateway for the guest traffic, and keep the guest traffic and the L3 MPLS all in one L2 VLAN on the switch.

View solution in original post

Highlighted
Here to help

Re: MS410-32 PBR / VRF

Thanks for your answer.


Yes i did thought of that but I was hoping not to change anything at the ISP as i want to manage the routing. But i think its going to be the solution.
Thanks again.

Welcome to the Meraki Community!
To start contributing, simply sign in with your Cisco account. If you don't yet have a Cisco account, you can sign up.