MS410-32 PBR / VRF

SOLVED
KarstenA
Here to help

MS410-32 PBR / VRF

Good Evening

 

My challenge is that I have 2 L3 MPLS, one must be the default route for data and voice vlan + meraki management vlan and the other must be the default route for guest wireless vlan. I know that MS410 does not support PBR or VRF. Any tips how i can accomplish that, whitout truking it to an another L3 device / L3 switch with a seperate routing instanse

 

 

1 ACCEPTED SOLUTION
PhilipDAth
Kind of a big deal
Kind of a big deal

Make the second L3 MPLS circuit the default gateway for the guest traffic, and keep the guest traffic and the L3 MPLS all in one L2 VLAN on the switch.

View solution in original post

2 REPLIES 2
PhilipDAth
Kind of a big deal
Kind of a big deal

Make the second L3 MPLS circuit the default gateway for the guest traffic, and keep the guest traffic and the L3 MPLS all in one L2 VLAN on the switch.

Thanks for your answer.


Yes i did thought of that but I was hoping not to change anything at the ISP as i want to manage the routing. But i think its going to be the solution.
Thanks again.

Get notified when there are additional replies to this discussion.
Welcome to the Meraki Community!
To start contributing, simply sign in with your Cisco account. If you don't yet have a Cisco account, you can sign up.
Labels